logo
Xi'an Xu&Hui Electromechanical Technology Co., Ltd.
απόσπασμα
Σπίτι > προϊόντα >
Τοποθετητής σφαλμάτων καλωδίου
>
Built-in 12μF Capacitor and 0~864 J Discharge Energy High Voltage Surge Generator

Built-in 12μF Capacitor and 0~864 J Discharge Energy High Voltage Surge Generator

Λεπτομέρειες προιόντος:
Τόπος καταγωγής: Xi'an Shaanxi Κίνα
Μάρκα: XZH TEST
Πιστοποίηση: ISO CE
Αριθμό μοντέλου: ΧΧΧV512-12L
Πληροφορίες λεπτομέρειας
Τόπος καταγωγής:
Xi'an Shaanxi Κίνα
Μάρκα:
XZH TEST
Πιστοποίηση:
ISO CE
Αριθμό μοντέλου:
ΧΧΧV512-12L
Επισημαίνω:

High Light

Επισημαίνω:

Built-in capacitor 12μF Cable Fault Locator

,

Discharge energy 0~864 J Cable Fault Detector

,

High voltage surge generator Cable Tester

Trading Information
Ποσότητα παραγγελίας min:
1 σετ
Συσκευασία λεπτομέρειες:
ξύλινη συσκευασία
Χρόνος παράδοσης:
5-8 ΕΡΓΑΣΙΜΕΣ ΗΜΕΡΕΣ
Όροι πληρωμής:
T/T
Δυνατότητα προσφοράς:
3000 μονάδες/έτος
Περιγραφή προϊόντων
Cable Fault Locator
Product Overview
It is primarily intended for impulse discharge during fault testing of cables with a voltage rating of twelve kilovolts and below, and also applicable to DC withstand voltage tests of other electrical equipment.
Key Features
  • Automatic overcurrent, overvoltage, and overheat protection;
  • DC withstand voltage and impulse discharge functions;
  • Uniform and controllable high-voltage pulse output;
  •  Strong short-circuit protection, allowing direct short-circuit operation to ground;
  • Dual 1.5-level pointer meter display for current and voltage, providing clear and intuitive readings, making it easy to see whether a fault point has fully discharged and providing real-time feedback on the discharge process;




Built-in 12μF Capacitor and 0~864 J Discharge Energy High Voltage Surge Generator 0

Impulse discharge function:

A system used to generate DC high-voltage pulse signals, producing electrical test signals with the required parameters. It is commonly used as an impulse high-voltage power supply for fault detection in power cables with voltage levels of 12kV and below.

It consists of a charging circuit and a discharging circuit. It samples the voltage of the high-voltage cable and sends it to the voltage regulation control circuit. The impulse magnet organically integrates the DC high-voltage power supply, energy storage capacitor, and high-voltage discharge sphere into one unit. It is typically used in high-voltage flashover fault testing and acoustic-magnetic synchronization fault point location.

Παρόμοια προϊόντα
Πάρτε την καλύτερη τιμή
Πάρτε την καλύτερη τιμή
Πάρτε την καλύτερη τιμή
Smart TDR Cable Fault Locator for Low Voltage Cable Testing and Detection Βίντεο
Smart TDR Cable Fault Locator for Signal and Communication Cable Detection Βίντεο