XHHV535-2TS
This device is a high-end, trolley-type experimental instrument that integrates a DC high-voltage source, energy storage capacitor, discharge sphere device, automatic discharge device, and voltage level switching device into one unit. This equipment completely solves the problems of ease of use, portability, and safety and reliability associated with traditional experimental devices.
Technical Parameters
Impulse High Voltage: 0～32kV, 0～16kV, 0～8kV (3-level adjustment)
High Voltage Side Current: 0～60mA
High Voltage Accuracy: Class 2.5
Built-in Capacitor: 2μF/32kV, 8μF/16kV, 32μF/8kV (3-level adjustment)
Discharge Energy: 1024J (all)
Output Voltage Polarity: Negative
Impulse Time: Automatic impulse approximately 7 seconds, manual impulse with arbitrary controllable time
Overcurrent Protection: 9A (greater than 5S) on the low voltage side
Overtemperature Protection: 105℃
Maximum Power: 2000W
Operating Power Supply: AC 220V±10% 50Hz±2Hz
Ambient Temperature: -25～+65℃
Instrument Components:
1. High-voltage pulse generator main unit: Applyes high voltage and high-energy pulse signals to the cable under test;
2. High-voltage output cable (5 meters): Connects the high-voltage output terminal of the main unit to the core of the cable under test;
3. Ground wire (5 meters): Grounding wire for sampling, high-voltage ground, and discharge rod;
4. Power cord (1.8 meters): Instrument operating power cord;
5. Discharge rod: Performs DC current-limited discharge or DC short-circuit discharge on the cable under test;
6. Fuse: Backup fuse for AC220V power supply system (8A fuse).
Το μήνυμά σας πρέπει να αποτελείται από 20-3.000 χαρακτήρες!