logo
Xi'an Xu&Hui Electromechanical Technology Co., Ltd.
απόσπασμα
Σπίτι > προϊόντα >
Τοποθετητής σφαλμάτων καλωδίου
>
LV TDR Cable Fault Locator with Impulse Current Testing for Accurate Fault Detection

LV TDR Cable Fault Locator with Impulse Current Testing for Accurate Fault Detection

Λεπτομέρειες προιόντος:
Τόπος καταγωγής: Xi'an
Μάρκα: XZH TEST
Πιστοποίηση: ISO/CE
Αριθμό μοντέλου: XHGG501C
Πληροφορίες λεπτομέρειας
Τόπος καταγωγής:
Xi'an
Μάρκα:
XZH TEST
Πιστοποίηση:
ISO/CE
Αριθμό μοντέλου:
XHGG501C
Συχνότητα δειγματοληψίας:
100MHz
Αμβέλεια παλμού χαμηλής τάσης:
35V
Ελάχιστο ψήφισμα:
1.0m
Επισημαίνω:

High Light

Επισημαίνω:

Impulse Current Testing Cable Fault Locator

,

LV Cable Fault Locator

,

TDR Cable Tester

Trading Information
Ποσότητα παραγγελίας min:
1 σετ
Συσκευασία λεπτομέρειες:
Ξύλινη συσκευασία
Χρόνος παράδοσης:
5-8 εργάσιμες
Όροι πληρωμής:
T/T
Δυνατότητα προσφοράς:
3000 μονάδες/έτος
Περιγραφή προϊόντων
XHGG501C LV TDR Cable Fault Locator 
The LV TDR cable fault locator provides accurate detection and location of faults in low voltage cables. Combined with impulse current testing capability, this system offers comprehensive cable fault analysis for efficient maintenance and repair operations.
Key Features
  • Time Domain Reflectometry (TDR) technology for precise fault location
  • Impulse current testing capability for comprehensive analysis
  • Designed for low voltage cable systems
  • Accurate fault detection and distance measurement
  • Professional-grade cable maintenance solution
    Screen size 7-inch
    Power supply method Charging AC110V~240V, 50Hz/60Hz;Powered by built-in 10400mAh lithium battery
    Working conditions -20~+65℃, relative humidity ≤90%

LV TDR Cable Fault Locator with Impulse Current Testing for Accurate Fault Detection 0

Regarding waveforms


Standard waveforms for the entire length and intermediate joints

LV TDR Cable Fault Locator with Impulse Current Testing for Accurate Fault Detection 1

Analysis: At time t1, the pulse waveform generated by the flash detector is positive (or negative); at time t2, the back pulse waveform from the intermediate joint in the cable is shown; at time t3, the full-length (terminal) reflected pulse waveform is positive, representing a reflection of the same polarity (similar to an open circuit fault); at time t4, the full-length (terminal) secondary reflected waveform is shown. Due to pulse attenuation, the secondary reflected pulse waveform at time t4 has a smaller amplitude than the primary reflected pulse waveform at time t3. The total length of the cable and the distance between the intermediate joints are also considered.

LV TDR Cable Fault Locator with Impulse Current Testing for Accurate Fault Detection 2